What happens if the inflatable does not stay inflated with constantly blowing air blower? You'll need to repair the tears with tear aids, or stitchings. Most bounce inflatables come with patches and repair kits. If you do not have a repair kit, you may find a patch kit on our website. To repair tears on an inflatable, please follow the simple steps below.
Cut out the patch that is larger than the puncture.

The patch must be cut in a circle or have rounded eges to prevent peeling.
Make sure the area is properly cleaned. Rubbing alcohol may be used to clean a teared surface.

(a) For vinyl and nylon, apply the glue on back of the patch and apply it over the puncture and press firmly to botain proper adhesion.

(b) For PVC materials, you may sew the tear or hole with a patch using strong thread. Read owner's manual to see if you can sew tears or holes.

Once repair is complete, do not inflate the Bounce House for at least 2 hours.